{"action":"create","ckan_id":null,"date_created":"Mon, 23 Mar 2026 23:52:56 GMT","date_finished":null,"harvest_job_id":"08eedf9d-707e-443d-9c23-16be37cd7340","harvest_source_id":"4c62556f-0fa3-402d-90f6-6a46cd80a117","id":"e3daecd6-fad5-4d3d-bc0a-759fd452acc1","identifier":"https://hazards.fema.gov/filedownload/metadata/R10/630771-PostPrelimProcessing.xml","parent_identifier":null,"source_hash":"e2e481832dd8304ccb8ace17a96a579a2bd53e41660a5e219f67b6639db70eb4","source_raw":"\r\nFederal Emergency Management Agency20090925DIGITAL FLOOD INSURANCE RATE MAP DATABASE, COOS COUNTY, OREGON, USAFEMA-DFIRM-FinalWashington, DCFederal Emergency Management Agencyhttp://www.fema.gov/mscWEST Consultants, Inc.20090925FEMA CASE 07-10-0017SThe Digital Flood Insurance Rate Map (DFIRM) Database depicts flood risk Information And supporting data used to develop the risk data. The primary risk; classificatons used are the 1-percent-annual-chance flood event, the 0.2-percent- annual-chance flood event, and areas of minimal flood risk. The DFIRM Database is derived from Flood Insurance Studies (FISs), previously published Flood Insurance Rate Maps (FIRMs), flood hazard analyses performed in support of the FISs and FIRMs, and new mapping data, where available. The FISs and FIRMs are published by the Federal Emergency Management Agency (FEMA). The file is georeferenced to earth's surface using the UTM projection and coordinate system. The specifications for the horizontal control of DFIRM data files are consistent with those required for mapping at a scale of 1:12,000.The FIRM is the basis for floodplain management, mitigation, and insurance activities for the National Flood Insurance Program (NFIP). Insurance applications include enforcement of the mandatory purchase requirement of the Flood Disaster Protection Act, which ''... requires the purchase of flood insurance by property owners who are being assisted by Federal programs or by Federally supervised, regulated or insured agencies or institutions in the acquisition or improvement of land facilities located or to be located in identified areas having special flood hazards,'' Section 2 (b) (4) of the Flood Disaster Protection Act of 1973. In addition to the identification of Special Flood Hazard Areas (SFHAs), the risk zones shown on the FIRMs are the basis for the establishment of premium rates for flood coverage offered through the NFIP. The DFIRM Database presents the flood risk information depicted on the FIRM in a digital format suitable for use in electronic mapping applications. The DFIRM database is a subset of the Digital FIS database that serves to archive the information collected during the FIS.20080626FIRM and FIS Effective DateCompleteIrregular-124.665762-123.48417544.00848142.486842ISO 19115 Topic Categoryhydrologyenvironmentinland WatersstructuretransportationelevationFEMA NFIP Topic CategoryDFIRMFIRMFEMA Flood Hazard ZoneDFIRM DatabaseSpecial Flood Hazard AreaDigital Flood Insurance Rate MapCBRSCoastal Barrier Resources SystemRiverine FloodingCoastal FloodingNFIPBase Flood ElevationSFHAFlood Insurance Rate MapFloodwaynoneREGION 10STATE ORCOUNTY COOSCOUNTY-FIPS 007COMMUNITY CountywideFEMA-CID 41011CNoneThe hardcopy FIRM and the accompanying FISs are the official designation of SFHAs and Base Flood Elevations (BFEs) for the NFIP. For the purposes of the NFIP, changes to the flood risk information published by FEMA may only be performed by FEMA and through the mechanisms established in the NFIP regulation (44 CFR Parts 59-78). These digital data are produced in conjunction with the hardcopy FIRMs and generally match the hardcopy map exactly. However the hardcopy flood maps and flood profiles are the authoritative documents for the NFIP. Acknowledgement of FEMA would be appreciated in products derived from these data.Federal Emergency Management AgencyFederal Insurance and Mitigation AdministrationFederal Insurance and Mitigation Administrationmailing
500 C Street S.W.
WashingtonDistrict of Columbia20472USA1-800-358-9616www.fema.gov/mscMicrosoft Windows XP Version 5.1 (Build 2600) Service Pack 2; ESRI ArcCatalog 9.2.4.1420Federal Emergency Management Agency20090925Flood Insurance Study, COOS COUNTY, OREGON, USADocumentWashington, DCFederal Emergency Management Agencyhttp://www.fema.gov/mscFederal Emergency Management Agency20090925Flood Insurance Rate Map, COOS COUNTY, OREGON, USAMapWashington, DCFederal Emergency Management Agencyhttp://www.fema.gov/mscFederal Emergency Management Agency20090925Digital Flood Insurance Rate Map, COOS COUNTY, OREGON, USARaster and Vector Digital DataWashington, DCFederal Emergency Management Agencyhttp://www.fema.gov/mscThe DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hard copy FEMA Flood Insurance Rate Map (FIRM). The published effective FIRM and DFIRM maps are issued as the official designation of the SFHAs. As such they are adopted by local communities and form the basis for administration of the NFIP. For these purposes, they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Map Production Coordination Contractors. Attribute accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA 's DFIRM database was also performed. To obtain more detailed information in areas where Base Flood Elevations (BFEs) and/or floodways have been determined, users are encouraged to consult the Flood Profiles and Floodway Data and/or Summary of Stillwater Elevations tables contained within the FIS report that accompanies this DFIRM database. Users should be aware that BFEs shown in the S_BFE table represent rounded whole-foot elevations. These BFEs are intended for flood insurance rating purposes only and should not be used as the sole source of flood elevation information. Accordingly, flood elevation data presented in the FIS report must be used in conjunction with the FIRM for purposes of construction and/or floodplain management. The 1-percent-annual-chance water-surface elevations shown in the S_XS table match the regulatory elevations shown in the FIS report.When FEMA revises a FIS, adjacent studies are checked to ensure agreement between flood elevations at the boundaries. Likewise, flood elevations at the confluence of streams studied independently are checked to ensure agreement at the confluence. The FIRM and the FIS are developed together and care is taken to ensure that the elevations and other features shown on the flood profiles in the FIS agree with the information shown on the FIRM. However, the elevations as shown on the FIRM are rounded whole-foot elevations. They must be shown so that a profile recreated from the elevations on the FIRM will match the FIS profiles within one half of one foot.</Data contained in the DFIRM Database files reflect the content of the source materials. Features may have been eliminated or generalized on the source graphic, due to scale and legibility constraints. With new mapping, FEMA plans to maintain full detail in the spatial data it produces. However, older information is often transferred from existing maps where some generalization has taken place. Flood risk data are developed for communities participating in the NFIP for use in insurance rating and for floodplain management. Flood hazard areas are determined using statistical analyses of records of river flow, storm tides, and rainfall; information obtained through consultation with the communities; floodplain topographic surveys; and hydrological and hydraulic analysis. Both detailed and approximate analyses are employed. Generally, detailed analyses are used to generate flood risk data only for developed or developing areas of communities. For areas where little or no development is expected to occur, FEMA uses approximate analyses to generate flood risk data. Typically, only drainage areas that are greater than one square mile are studied.The DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. The published hardcopy FEMA FIRM. The published effective FIRM and DFIRM are issued as the effective FIRM and DFIRM are issued as the official designation of the SFHAs. As such, they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Map Production Coordination Contractors. Horizontal accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also /r/nperformed.The DFIRM Database consists of countywide vector files and associated attributes produced in conjunction with the hardcopy FEMA FIRM. The published effective FIRM and DFIRM are issued as the official designation of the SFHAs. As such, they are adopted by local communities and form the basis for administration of the NFIP. For these purposes they are authoritative. Provisions exist in the regulations for public review, appeals and corrections of the flood risk information shown to better match real world conditions. As with any engineering analysis of this type, variation from the estimated flood heights and floodplain boundaries is possible. Details of FEMA's requirements for the FISs and flood mapping process that produces these data are available in the Guidelines and Specifications for Flood Map Production Coordination Contractors. Vertical accuracy was tested by manual comparison of source graphics with hardcopy plots and a symbolized display on an interactive computer graphic system. Independent quality control testing of FEMA's DFIRM database was also performed.Federal Emergency Management Agency19840801Effective Flood Insurance Rate MapsEffective DateWashington, DCFederal Emergency Management AgencyRiver marks digitized from effective FIRM panelsOnline19840801Effective DateFIRM1S_RIV_MRKS_FLD_HAZ_ARS_GEN_STRUCTFederal Emergency Management Agency19840801Effective Flood Insurance StudyEffective DateWashington, DCFederal Emergency Management AgencyFloodway data table information extracted from effective FIS report for the City of North Bend, Coos County, OROnline19840801Effective DateFIS4S_GEN_STRUCTS_GEN_STRUCTS_XSUSGS20080620FIRM Panel LayoutEffective DateReston, VAUSGSFIRM Panel Layout developed from USGS 7.5 Minute QuadranglesOnline20080620Effective DateBASE4S_FIRM_PANS_QUAD_INDEXWEST Consultants, Inc.20080620Base Flood ElevationsPublication DateWashington, DCFederal Emergency Management AgencyBFEs created from effective floodway panels and FIS reports and incorporate the vertical datum shift from NGVD29 to NAVD88Online20080620Effective DateSTUDY1S_BFEGeospatial Enterprise Office20010101County BoundaryPublication DateSalem, OregonGeospatial Enterprise OfficeCounty boundary extracted from datasetOnline20010101Effective DateBASE5S_POL_LNGeospatial Enterprise Office20070207Corporate BoundariesPublication DateSalem, OregonGeospatial Enterprise OfficeCorporate boundary extracted from datasetOnline20070207Effective DateBASE6S_POL_LNGeospatial Enterprise Office20030101Forest and BLM BoundariesPublication DateSalem, OregonGeospatial Enterprise OfficeLand ownership boundaries extracted USFS, National Forest, and State Forest GIS dataOnline20030101Effective DateBASE7S_POL_LNOregon Parks Department20080512State ParksEffective DateSalem, OregonOregon Parks and RecreationGIS data for state parks, recreation areas, and historical sites obtained from Oregon Parks and Recreation DepartmentOnline20080512Effective DateBASE11S_POL_LNFWS Portland Office20080507Wildlife Refuge BoundariesEffective DatePortland, OregonFWS Portland OfficeUpdated wildlife refuge boundariesOnline20080507Effective DateBASE12S_POL_LNFederal Emergency Management Agency20050616Letter of Map RevisionEffective DateWashington, DCFederal Emergency Management AgencyMapping extracted from LOMR dated 2005-06-16Online20050616Effective DateLOMC2S_FLD_HAZ_ARS_LOMRFederal Emergency Management Agency19841115Effective Flood Insurance StudyEffective DateWashington, DCFederal Emergency Management AgencyFloodway data table information extracted from effective Coos County Unincorporated FISOnline19841115Effective DateFIS1S_XSS_GEN_STRUCTFederal Emergency Management Agency19840928Effective Flood Insurance StudyEffective DateWashington, DCFederal Emergency Management AgencyFloodway data table information extracted from effective FIS report for the City of Coquille, Coos County, OROnline19840928Effective DateFIS2S_XSFederal Emergency Management Agency19840801Effective Flood Insurance StudyEffective DateWashington, DCFederal Emergency Management AgencyFloodway data table information extracted from effective FIS report for the City of Lakeside, Coos County, OROnline19840801Effective DateFIS3S_XSFederal Emergency Management Agency19840716Effective Flood Insurance StudyEffective DateWashington, DCFederal Emergency Management AgencyFloodway data table information extracted from effective FIS report for the City of Myrtle Point, Coos County, OROnline19840716Effective DateFIS5S_XSOregon Water Resource Department19941001Public Land Survey SystemPublication DateSalem, OregonGeospatial Enterprise OfficeThe original PLSS theme was created bythe Oregon Water Resource Department (OWRD). Unigroup (Oregons Prison CAD/CAM shop) removed the DLC lines from the PLSS theme. (This is a legacy dataset, nobody around remembers how Unigroup did the conversion.)Online19941001Effective DateBASE8S_PLSS_LNS_PLSS_ARU.S. Census Bureau20070503Transportation FeaturesPublication DateWashington, DCU.S. Census BureauData obtained from the 2006 Second Edition TIGER/Line? Files.Online20070305Effective DateBASE2S_TRNSPORT_LNNational Geodetic Survey20080125NGS Permanent BenchmarksPublication DateSilver Springs, MDNational Geodetic SurveyPermanent benchmarks downloaded from NGS website. Benchmarks meet the criteria of vertical order 2nd or better and stability B or betterOnline20080125Effective DateBASE1S_PERM_BMKUSDA-FSA20050815Index of Raster ImagesPublication DateWashington, DCUSDA-FSANAIP Imagery used as raster background for Coos County, OR DFIRMsOnline20050815Effective DateBASE3S_BASE_INDEXUSGS National Hydrography Dataset20080131Water FeaturesEffective DateSalem, OregonGeospatial Enterprise OfficeGIS data for creeks, rivers, sloughs, etc. in Coos County, OROnline20080131Effective DateBASE9S_WTR_LNFederal Emergency Management Agency19841115Profile BaselinesEffective DateWashington, DCFederal Emergency Management AgencyProfile baseline extracted from existing Floodway MapsOnline19841115Effective DateFBFM1S_WTR_LNPacific Northwest Hydrography Framework20050926Water AreasPublication DateSalem, OregonGeospatial Enterprise OfficeData and associated metadata can be accessed at the State of Oregon Geospatial Enterprise Office (GEO) or the Pacific Northwest Hydrography Framework website.Online20050926Effective DateBASE10S_WTR_ARFederal Emergency Management Agency19980218Case Number 05-10-355PEffective DateWashington, DCFederal Emergency Management AgencyFlood hazard information incorporated from LOMCOnline19980218Effective DateLOMC1S_LOMRThe DFIRM Database is compiled in conjunction with the hardcopy FIRM and the final FIS report. The specifics of the hydrologic and hydraulic analyses performed are detailed in the FIS report. The results of these studies are submitted in digital format to FEMA. These data and unrevised data from effective FIRMs are compiled onto the base map used for DFIRM publication and checked for accuracy and compliance with FEMA standards.19980218VectorPointStringGT-polygon composed of chainsUniversal Transverse Mercator100.999600-123.0000000.000000500000.0000000.000000coordinate pair0.0000100.000010metersNorth American Datum of 1983Geodetic Reference System 806378137.000000298.257222North American Vertical Datum of 19880.01feetAttribute valuesS_FLD_HAZ_ARLocation and attributes flood insurance risk zones on the DFIRM.FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_FLD_HAZ_LNLocation and attributes for boundaries of flood insurance risk zones on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_POL_ARLocation and attributes for political jurisdictions shown on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_POL_LNLocation and attributes for political boundaries shown on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_PLSS_ARLocation and attributes of sections, townships and ranges on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_PLSS_LNLocation and attributes section lines, township lines and range lines on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_BASE_INDEXLocation and attributes for a tiling index for raster data used for the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_BFELocation and attributes for base flood elevations lines shown on DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_FIRM_PANLocation and attributes for DFIRM hardcopy map panelsFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_GEN_STRUCTThe S_Gen_Struct table contains information about the hydraulic structures within the study area.Standard DFIRM Database Guidelines and Specifications [FEMA]S_LABEL_LDLocation and attributes for leader lines on transportation and hydrography labels shown on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_LABEL_PTLocation and attributes for transportation and hydrography labels shown on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_PERM_BMKLocation and attributes for bench marks on the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_QUAD_INDEXLocation and attributes for USGS quadrangle maps covering the DFIRM area.FEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_RIV_MRKThe S_Riv_Mrk table contains information about the River Marks shown on the hardcopy FIRM if applicable.Standard DFIRM Database Guidelines and Specifications [FEMA]S_TRNSPORT_LNThe S_Trnsport_Ln table contains information about the linear base map transportation features such as roads, railroads, and airports.Standard DFIRM Database Guidelines and Specifications [FEMA]S_WTR_ARThe S_Wtr_Ar table contains information about surface water area features.Standard DFIRM Database Guidelines and Specifications [FEMA]S_WTR_LNLocation and attributes for hydrography features shown on DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)S_XSLocation and attributes for cross-section lines in the area covered by the DFIRMFEMA Guidelines and Specifications for Flood Hazard Mapping Partners, Appendix L: Guidance for Preparing Draft Digital Data and DFIRM Databases (available at http://www.fema.gov/fhm/dl_cgs.shtm)The DFIRM Database is made up of several data themes containing both spatial and attribute information. These data together represent the current flood risk for the subject area as identified by FEMA. The attribute tables include SFHA locations, flood zone designation, BFEs, political entities, cross-section locations, FIRM panel information, and other data related to the NFIP.Appendix L of FEMA Guidelines and Specifications for FEMA Flood Hazard Mapping Partners contains a detailed description of each attribute code and a reference to other relevant information.The following tables are included in this data set: S_FLD_HAZ_AR S_FLD_HAZ_LN S_POL_AR S_POL_LN S_PLSS_AR S_PLSS_LN S_BASE_INDEX S_BFE S_FIRM_PAN S_GEN_STRUCT S_LABEL_LD S_LABEL_PT S_PERM_BMK S_QUAD_INDEX S_RIV_MRK S_TRNSPORT_LN S_WTR_AR S_WTR_LN S_XS L_COMM_INFO L_MT1_LOMC L_STN_START STUDY_INFOFEMA, Map Service Centermailing address
P.O. Box 1038
JessupMaryland20794-1038USA1-800-358-9616http://www.fema.gov/mscData requests must include the full name of the community or county and the FIRM panel number(s) or the 7.5-minute series quadrangle sheet area(s) covered by the request.Downloadable DataNo warranty expressed or implied is made by FEMA regarding the utility of the data on any other system nor shall the act of distribution constitute any such warranty. FEMA will warrant the delivery of this product in a computer-readable format, and will offer appropriate adjustment of credit when the product is determined unreadable by correctly adjusted computer input peripherals, or when the physical medium is delivered in damaged condition. Requests for adjustment of credit must be made within 90 days from the date of this shipment from the ordering site.ESRI Shapefilehttp://www.fema.gov/mscMIFhttp://www.fema.gov/mscARCEhttp://www.fema.gov/mscESRI ShapefileCD-RomISO-9660MIFCD-RomISO-9660ARCECD-RomISO-9660Contact DistributorPrinted DFIRMs that match this data set are available from FEMA at the Map20080626FEMA RepresentativeFederal Emergency Management AgencyFederal Insurance and Mitigation Administrationmailing
500 C Street S.W.
WashingtonDistrict of Columbia20472USA1-800-358-9616www.fema.gov/mscFGDC Content Standards for Digital Geospatial MetadataFGDC-STD-001-1998http://hazards.fema.govhttp://www.epsg.orgFEMA NFIP Metadata Content and Format Standard","source_transform":null,"status":"error"}